GZ1-E Commercial Ozone Generator
Ozone generator with compressor, with a production of 1 gO3/h, at a concentration of 2.5 g/Nm3. 230V, 50-60Hz, 80W.
Air-cooled ozone generating equipment, with low ozone concentration, with air compressor, air filter and silica gel dryer. With manual control of ignition by ON/OFF switch and manual ozone power control by potentiometer. With power indicator light and ozone amp consumption indicator. With input and output bushings for 8mm tube. Ready to plug and play.
Manufacturing in 4 days
Commercial Ozone Generator
Technical specifications
What is it used for?
This generator is mainly used to carry out air and room treatments, with the idea of eliminating odors and sanitizing the room itself and surfaces. Used in cold rooms, hotel extraction hoods, and ventilation ducts. It is also used to disinfect small water tanks by bubbling ozone.
Product Details
| Room fittings | Place in a clean and dry space, free of fats and fumes. |
| Ozone Generation system | Air-cooled 1gO3/h core. With borosilicate dielectric. |
| Electricity and electronic | High voltage transformer, EMI filter, and fuse. |
| Compressed air unit |
Pre-filter Silica gel dryer Air pump Filter |
| Control | Ignition with manual START and GENERATE switch. Regulation of the ozone power, by means of a manual potentiometer. |
| Sensors | Ammeter |
| Technical Valves | Air flowmeter with manual regulation |
| Included in the packaging |
2 meters of 8mm Teflon Tube 2 meters of 8mm Silicone Tube Silica Gel Fixing Clips + Silica Gel Fixing Earmuffs Electrical Connection Cable User Manual |
| Ozone Production | 1 gO3/h |
| Ozone concentration | 2,5 gO3/Nm3 |
| Air/Oxygen flow | 12 lpm |
| Power supply | 230V, 50-60Hz |
| Electric Power | 80W |
| Gas connection | IN/OUT Tube 8 mm (outside diameter). |
| Weight | 4 KG |
| Humidity | <70% |
| Room temperature | 5-35ºC |
| Source gas | The equipment is powered by ambient air |
| Gas quality | The environment must be free of grease and VOC`S <150 ppm |
| Working pressure | 0-0,4 bar |
| Made by | ZonoSistem |
| Made in | Spain |
| Sold from | 2010 |
| Certificates | CE, EUOTA, BIOCIDAL |
| Warranty | 2 years. Indefinitely extendable if you have a maintenance contract. |
Functioning
Pressing the START button starts the air pump, and begins to suck in air from the environment. This air is dried, filtered and led to the generation core. With the flow meter you can regulate the desired air flow. When you press the GENERATE button, the generation core will start generating ozone.
To regulate the desired ozone power, use the potentiometer.
Documentation Included
Safety manual.
User manual, installation and commissioning.
Maintenance manual.
Declaration of conformity.
Certificate of guarantee.
Compliance with the biocidal regulation.
Results of the Quality Test in the factory.
Technology
This ozone generator uses high frequency corona discharge technology with a borosilicate dielectric.
