HIDRO V GZO75-ES Professional Ozone Plant
Hydro V type Ozone Generating Plant for water treatment by recirculation in tank or pipe. With Professional Ozone Generator, with compressor, oxygen concentrator, control by Logo!, venturi dilution system and pump. Ozone production of 75 gO3/h, at a concentration of 65 g/Nm3. 400V, 3P+N, 50Hz, 5.6KW.
[Spanish design and manufacture] Ideal for injecting ozone into a tank or water pipe.
[Built-in dilution system] It manages to inject ozone into the water, thanks to the pump and venturi.
[Control by LOGO] With daily time programmer and manual power control.
[Simple Installation] You only have to connect the equipment to the tank or pipe you want to treat and provide it with a light source.
[No replenishment of chemicals] Ozone is generated from the air we breathe.
Manufacturing in 10 days
Professional Ozone Generator
What is it used for?
To dose ozone in a water tank, maintaining a constant ozone concentration. Used to disinfect and purify water, tanks and pipes. Widely used in agricultural water treatment, for drip or sprinkler irrigation, in treatment of drinking water, wastewater, process water, cooling towers, swimming pools, aquariums, etc. Ozone is an excellent disinfectant, which allows you to maintain hygiene both in the water and in the pipes.
|Ozone generator||Latest generation GZO75-ES model|
|Oxygen concentrator||With compressor, oxygen concentrator at 95% purity and -30ºC Dew Point|
|Ozone Dilution System||Composed of pump, venturi and anti-return safety system|
|Control||By controller Logo!. Daily programmer, alarm and maintenance manager.|
|Communication||Wired Remote ON, Status Relays (Initiated, Generating, Fault).|
Amps in Ozone, Compressed Air Pressure, Oxygen Pressure and Flow, Door Opening.
On the ground: Maximum and minimum pressure switch in the tower, manometer. Optional Redox Control and Dissolved Ozone Sensor.
|Technical Valves||Outlet ozone solenoid valve, oxygen flowmeter with manual regulation. Stainless steel 316L motorized safety anti-return valve on the venturi.|
|Included in the packaging||User manual|
|Ozone Production||75 gO3/h|
Maximum = 100g/Nm3
Optimum = 65g/Nm3
|Air flow||20 lpm|
|Power supply||400V, 3P+N, 50Hz|
Ozone Generator = 3.4 KW
Pump = 2.2KW
|Hydraulic connection||Inlet and outlet in Flange DN50|
|Dimensions||1125 x 850 x 1800 mm (Width x Depth x Height)|
|Hydraulic Working Pressure||Between 0 and 6.5 bar|
|Fluid freatures||Ǿ Solids < 1mm; Suspended solids (SS)<150mg/l; Density = 1 g/cm3 ± 5%|
|Working pressure||0 - 0,4 bar|
The room must be well ventilated, and provide an extraction system in case of leaks. Install sign with safety warnings. It is recommended that the room have a drainage box.
|Certificates||CE, BIOCIDA PT2, PT4, PT5, PT11|
|Warranty||2 years extendable indefinitely, with maintenance contract|
This HIDRO V GZO-ES ozone plant includes a control by Logo! from which you can easily and intuitively program different operating time slots throughout the day, using a scheduler. When the equipment receives a start order, the refrigeration circuit is activated, and the compressor starts up, takes air from the atmosphere, filters it, dries it, and introduces it into the PSA, where nitrogen is removed from the air, and it is concentrated oxygen up to 95% purity. This flow of oxygen is conducted to the generation core, where the corona discharge is applied and the oxygen is transformed into ozone. With the oxygen flow meter you can regulate the desired flow. The recirculation pump takes water from the tank, and the ozone generated is injected into the venturi, returning a highly ozonated water to the tank, where it is homogenized and reacts with the pollutants. In this way you can disinfect the water, the tank and the pipes.
User manual, installation and commissioning.
Declaration of conformity.
Certificate of guarantee.
Compliance with the biocidal regulation.
Results of the Quality Test in the factory.
This GZO ozone generator uses high frequency corona discharge technology with ceramic dielectric.